Sebelumnya kita sudah coba config basic-bgp
sekarang kita coba advertise IP dari juniper.

kita bikin prefix-list IP yg akan kita advertise
=================================

ebenz@junOS# edit prefix-list export
ebenz@junOS# set 10.100.100.0/24
[edit policy-options prefix-list export]
ebenz@junOS# set 10.100.101.0/24
[edit policy-options prefix-list export]
ebenz@junOS# set 10.100.102.0/24
[edit policy-options prefix-list export]
ebenz@junOS# set 10.100.103.0/24
[edit policy-options prefix-list export]
ebenz@junOS# show
10.100.100.0/24;
10.100.101.0/24;
10.100.102.0/24;
10.100.103.0/24;
[edit policy-options prefix-list export]
ebenz@junOS#

kemudian kita null0 supaya IP tetep exist diluar (karena ini simulasi )

ebenz@junOS# edit routing-options static
[edit routing-options static]
ebenz@junOS# set route 10.100.100.0/24 reject
[edit routing-options static]
ebenz@junOS# set route 10.100.101.0/24 reject
[edit routing-options static]
ebenz@junOS# set route 10.100.102.0/24 reject
[edit routing-options static]
ebenz@junOS# set route 10.100.103.0/24 reject
[edit routing-options static]
ebenz@junOS# set route 10.100.104.0/24 reject
[edit routing-options static]
ebenz@junOS#

kemudian kita bikin statment untuk prefix-list

ebenz@junOS# edit policy-options
ebenz@junOS# set policy-statement export-prefix term 1 from prefix-list export

[edit policy-options]
ebenz@junOS# show
prefix-list export {
10.100.100.0/24;
10.100.101.0/24;
10.100.102.0/24;
10.100.103.0/24;
}
policy-statement export-prefix {
term 1 {
from {
prefix-list export;
}
}
}

hemm.. belum ada filtering
===================

[edit policy-options policy-statement export-prefix term 1]
ebenz@junOS# set then accept
[edit policy-options policy-statement export-prefix term 1
ebenz@junOS# show
from {
prefix-list export;
}
then accept;

[edit policy-options]
ebenz@junOS# set policy-statement export-prefix term 2 then reject
[edit policy-options]
ebenz@junOS# commit
commit complete
ebenz@junOS# show
term export-list {
from {
prefix-list export;
}
then accept;
}
term 2 {
then reject;
}
[edit policy-options policy-statement export-prefix]
ebenz@junOS# top
[edit]
ebenz@junOS# commit
commit complete

kemudian kita pasang statment pada protocol bgp
====================================

[edit protocols bgp]
ebenz@NETSOFT# edit group ASN-3030

[edit protocols bgp group ASN-3030]
ebenz@NETSOFT# show
type external;
peer-as 3030;
neighbor 172.16.0.204;

[edit protocols bgp group ASN-3030]
ebenz@NETSOFT# set export ?
Possible completions:
Export policy
( Open an expression
[ Open a set of values
[edit protocols bgp group ASN-3030]
ebenz@NETSOFT# set export export-prefix
[edit protocols bgp group ASN-3030]
ebenz@NETSOFT# commit
commit complete

kita tengok di sebrangnya apakah sudah dapet
===================================

cisco#sh ip route bgp
10.0.0.0/24 is subnetted, 4 subnets
B 10.100.102.0 [20/0] via 172.16.0.202, 00:00:16
B 10.100.103.0 [20/0] via 172.16.0.202, 00:00:16
B 10.100.100.0 [20/0] via 172.16.0.202, 00:00:16
B 10.100.101.0 [20/0] via 172.16.0.202, 00:00:16

Kali ini kita lagi coba2 build bgp dgn 3 router dalam 1 network yaitu 172.16.0.192/28 (tanpa filtering) just fur newbies.

JunOS : 172.16.0.202/28 ASN 2020
Quagga : 172.16.0.200/28 ASN 1010
AdvNetwork : 192.192.0.0/16
Cisco : 172.16.0.204/28 ASN 3030
AdvNetwork : 192.100.0.0/16

Kita Asumsikan bahwa quagga & Cisco sudah ready dgn config BGP nya, jadi kita tinggal coba step-step config di junOS tanpa filtering ;

config untuk peer asn 3030 (cisco)
ebenz@junOS> show bgp summary
BGP is not running
ebenz@junOS> edit
Entering configuration mode
[edit]
ebenz@junOS# edit protocols bgp
ebenz@junOS# set group ASN-3030 type external (peer as cisco)
[edit protocols bgp]
ebenz@junOS# set group ASN-3030 peer-as 3030
[edit protocols bgp]
ebenz@junOS# set group ASN-3030 neighbor 172.16.0.200
[edit protocols bgp]
ebenz@junOS# show
group ASN-3030 {
type external;
peer-as 3030;
neighbor 172.16.0.200;
}

config untuk peer asn 1010 (quagga)
[edit protocols bgp]
ebenz@junOS# set group ASN-1010 type external
[edit protocols bgp]
ebenz@junOS# set group ASN-1010 peer-as 1010
[edit protocols bgp]
ebenz@junOS# set group ASN-1010 neighbor 172.16.0.204
[edit protocols bgp]
ebenz@junOS# commit
commit complete

tinggal kita lihat status BGP ;
=====================
ebenz@junOS# run show bgp summary
Groups: 2 Peers: 2 Down peers: 2
Table Tot Paths Act Paths Suppressed History Damp State Pending
inet.0 0 0 0 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Damped…
172.16.0.200 3030 0 1 0 0 40 Active
172.16.0.204 1010 0 2 0 0 40 Active

hemm Active .., ups ternyata IP kebalik untuk peer 3030 harusnya IP 172.16.0.204 . Nope kita rename
=============================================================================

ebenz@junOS# edit group ASN-3030
[edit protocols bgp group ASN-3030]
ebenz@junOS# rename neighbor 172.16.0.200 to neighbor 172.16.0.204
[edit protocols bgp group ASN-3030]
ebenz@junOS# up
[edit protocols bgp]
ebenz@junOS# edit group ASN-1010
[edit protocols bgp group ASN-1010]
ebenz@junOS# rename neighbor 172.16.0.204 to neighbor 172.16.0.200
[edit protocols bgp group ASN-1010]
ebenz@junOS# commit
commit complete
[edit protocols bgp group ASN-1010]
[edit protocols bgp]
ebenz@junOS# show
group ASN-3030 {
type external;
peer-as 3030;
neighbor 172.16.0.204;
}
group ASN-1010 {
type external;
peer-as 1010;
neighbor 172.16.0.200;
}
[edit protocols bgp]
ebenz@junOS#

kita lihat status BGP nya kembali
==========================

ebenz@junOS# run show bgp summary
Groups: 2 Peers: 2 Down peers: 0
Table Tot Paths Act Paths Suppressed History Damp State Pending
inet.0 9 8 0 0 0 0
Peer AS InPkt OutPkt OutQ Flaps Last Up/Dwn State|#Active/Received/Damped…
172.16.0.200 1010 4 3 0 0 12 8/9/0 0/0/0
172.16.0.204 3030 1 5 0 0 0 0/0/0 0/0/0

sebelum filtering kita coba lihat route yg di dapat dari cisco dan quagga;
======================================================

ebenz@junOS> show route advertising-protocol bgp 172.16.0.200

inet.0: 14 destinations, 19 routes (14 active, 0 holddown, 0 hidden)
Prefix Nexthop MED Lclpref AS path
* 172.16.0.0/16 172.16.0.204 3030 I
* 192.192.191.0/24 172.16.0.204 3030 I
* 192.192.192.0/24 172.16.0.204 3030 I
* 192.192.193.0/24 172.16.0.204 3030 I
* 192.192.194.0/24 172.16.0.204 3030 I
* 192.192.195.0/24 172.16.0.204 3030 I

ebenz@junOS> show route advertising-protocol bgp 172.16.0.204

inet.0: 14 destinations, 19 routes (14 active, 0 holddown, 0 hidden)
Prefix Nexthop MED Lclpref AS path
* 192.100.1.0/24 172.16.0.200 1010 ?
* 192.100.2.0/24 172.16.0.200 1010 ?
* 192.100.3.0/24 172.16.0.200 1010 ?
* 192.100.4.0/24 172.16.0.200 1010 ?
* 192.100.5.0/24 172.16.0.200 1010 ?

Biasanya tidak semua prefix mau di terima kita, misalnya ada ip2 private yg tidak mau kita terima routenya.
Pada case ini misal kita mau filter prefix 20.21.22.0/24 , kita lihat dulu route sebelumnya.

ebenz@enterprise# run show route | match 20.21.22.
20.21.22.0/30 *[OSPF/150] 00:00:53, metric 21, tag 0
20.21.22.4/30 *[OSPF/150] 00:00:53, metric 21, tag 0
20.21.22.8/30 *[OSPF/150] 00:00:53, metric 21, tag 0
20.21.22.12/30 *[OSPF/150] 00:00:53, metric 21, tag 0
20.21.22.16/30 *[OSPF/150] 00:00:53, metric 21, tag 0
20.21.22.20/30 *[OSPF/150] 00:00:53, metric 21, tag 0

[edit]
ebenz@enterprise#

simple config untuk mem-filter ip di ospf ;

ebenz@enterprise# edit policy-options policy-statement ospf-filter
[edit policy-options policy-statement ospf-filter]
ebenz@enterprise# set term filter-private from neighbor 172.16.0.204
ebenz@enterprise# set term filter-private from route-filter 20.21.22.0/24 orlonger
ebenz@enterprise# set term filter-private then reject
ebenz@enterprise# set term else then accept
ebenz@enterprise# show
term filter-private {
from {
neighbor 172.16.0.204;
route-filter 20.21.22.0/24 orlonger;
}
then reject;
}
term else {
then accept;
}

[edit policy-options policy-statement ospf-filter]

kemudian import statment pada protocol ospf

ebenz@enterprise# edit protocols ospf

[edit protocols ospf]
ebenz@enterprise# set import ospf-filter

[edit protocols ospf]
ebenz@enterprise# show
import ospf-filter;
area 0.0.0.1 {
interface fe-0/0/0.0 {
hello-interval 10;
neighbor 172.16.0.204;
neighbor 172.16.0.200;
}
}

[edit protocols ospf]
ebenz@enterprise# commit
commit complete

[edit protocols ospf]
ebenz@enterprise# run clear ospf neighbor

[edit protocols ospf]
ebenz@enterprise# run show route | match 20.21.22.

[edit protocols ospf]

sudah hilang coba kita show route

ebenz@enterprise# top

[edit]
ebenz@enterprise# exit
Exiting configuration mode

ebenz@enterprise> show route

inet.0: 21 destinations, 21 routes (21 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both

0.0.0.0/0 *[OSPF/150] 00:00:56, metric 1, tag 0
> to 172.16.0.200 via fe-0/0/0.0
30.31.32.0/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.4/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.8/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.12/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.16/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.0/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.4/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.8/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.12/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.16/30 *[OSPF/150] 00:00:51, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0

Melanjutkan OSPF quagga <> mikrotik  mumpung lagi ada perangkat (thx bang maman),  kita tambahkan lagi neigbhor baru dengan perangkat juniper j2300 series dalam satu network.

                              quagga
                                    / \
                                  /     \
                         junOS   Mikrotik

- config IP dan protocols ospf di junOS
login: ebenz
Password:

— JUNOS 8.3R1.5 built 2007-04-13 22:22:33 UTC
ebenz@enterprise>
ebenz@enterprise# set interfaces fe-0/0/0 unit 0 family inet address 172.16.0.201/28
ebenz@enterprise# edit interfaces
[edit interfaces]
ebenz@enterprise# show
fe-0/0/0 {
description WAN;
unit 0 {
family inet {
address 172.16.0.201/28;
}
}
}
[edit interfaces]
ebenz@enterprise# set protocols ospf area 0.0.0.1 interface fe-0/0/0.0 hello-interval 10
note, untuk neigbhor bisa juga tidak diset
ebenz@enterprise# edit protocols
[edit protocols]
ebenz@enterprise# show
ospf {
area 0.0.0.1 {
interface fe-0/0/0.0 {
hello-interval 10;
neighbor 172.16.0.204;
neighbor 172.16.0.200;
}
}
}

[edit protocols]
ebenz@enterprise# commit
commit complete

[edit protocols]
ebenz@enterprise#

- check status ospf

ebenz@enterprise# up

[edit]
ebenz@enterprise# exit
Exiting configuration mode

ebenz@enterprise> show ospf neighbor
Address Interface State ID Pri Dead
172.16.0.204 fe-0/0/0.0 Full 172.16.0.204 1 39
172.16.0.200 fe-0/0/0.0 Full 172.16.0.200 0 38

check route check  route

ebenz@enterprise> show route

inet.0: 27 destinations, 27 routes (27 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both

0.0.0.0/0 *[OSPF/150] 00:24:48, metric 1, tag 0
> to 172.16.0.200 via fe-0/0/0.0
20.21.22.0/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
20.21.22.4/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
20.21.22.8/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
20.21.22.12/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
20.21.22.16/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
20.21.22.20/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.0/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.4/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.8/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.12/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
30.31.32.16/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.0/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.4/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.8/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.12/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.16/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.20/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.24/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.28/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
40.41.42.32/30 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
169.254.0.0/16 *[OSPF/150] 00:24:48, metric 20, tag 0
> to 172.16.0.200 via fe-0/0/0.0
172.16.0.192/28 *[Direct/0] 23:41:13
> via fe-0/0/0.0
172.16.0.201/32 *[Local/0] 23:41:13
Local via fe-0/0/0.0
192.168.99.0/24 *[OSPF/150] 00:24:48, metric 21, tag 0
> to 172.16.0.204 via fe-0/0/0.0
202.53.253.0/27 *[OSPF/150] 00:24:48, metric 20, tag 0
> to 172.16.0.200 via fe-0/0/0.0
224.0.0.5/32 *[OSPF/10] 01:41:03, metric 1
MultiRecv

ebenz@enterprise# run show route 0.0.0.0

inet.0: 27 destinations, 27 routes (27 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both

0.0.0.0/0 *[OSPF/150] 00:30:37, metric 1, tag 0
> to 172.16.0.200 via fe-0/0/0.0

[edit protocols ospf area 0.0.0.1]

check route di quagga

Router# sh ip route
Codes: K – kernel route, C – connected, S – static, R – RIP, O – OSPF,
I – ISIS, B – BGP, > – selected route, * – FIB route

O>* 20.21.22.0/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 20.21.22.4/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 20.21.22.8/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 20.21.22.12/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 20.21.22.16/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 20.21.22.20/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 30.31.32.0/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 30.31.32.4/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 30.31.32.8/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 30.31.32.12/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 30.31.32.16/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.0/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.4/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.8/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.12/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.16/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.20/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.24/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.28/30 [110/30] via 172.16.0.204, eth0, 01:06:21
O>* 40.41.42.32/30 [110/30] via 172.16.0.204, eth0, 01:06:21
C>* 127.0.0.0/8 is directly connected, lo
K>* 169.254.0.0/16 is directly connected, eth0
O 172.16.0.192/28 [110/10] is directly connected, eth0, 03:51:53
C>* 172.16.0.192/28 is directly connected, eth0
O>* 192.168.99.0/24 [110/30] via 172.16.0.204, eth0, 01:06:21

Basic configure untuk ospf di quagga (asumsi zebra, ospfd sudah terinstall)

quangga1 (172.16.0.200/28) —— (172.16.0.204/28)Mikrotik

- config IP address di zebra
[ebenz@ebenz ~]$ telnet localhost 2601
Trying 127.0.0.1…
Connected to localhost.localdomain (127.0.0.1).
Escape character is ‘^]’.

Hello, this is Quagga (version 0.98.3).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
User Access Verification
Password:
Router> en
Password:
Router#
Router# conf t
Router(config)# int eth0
Router(config-if)# ip ad
Router(config-if)# ip address 172.16.0.200/28
Router#

- config router ospf (ospfd)

ospfd# conf t
ospfd(config)# router ospf
ospfd(config-router)# ospf router-id 172.16.0.200
ospfd(config-router)# redistribute kernel
ospfd(config-router)# redistribute connected
ospfd(config-router)# redistribute static
ospfd(config-router)# network 172.16.0.192/28 area 0.0.0.1
ospfd(config-router)# default-information originate always
ospfd(config-router)# end

- Setting IP address Mikrotik

[admin@MikroTik] > ip address add address=172.16.0.204/28 interface=Backbone

- config routing ospf Mikrotik

[admin@MikroTik] > routing ospf set router-id=172.16.0.204
[admin@MikroTik] > routing ospf set distribute-default=never (note, neigbhor sudah aktif)
[admin@MikroTik] > routing ospf set redistribute-connected=as-type-2
[admin@MikroTik] > routing ospf set redistribute-static=as-type-2

- config area & network

[admin@MikroTik] > routing ospf area add area-id=0.0.0.1 name=area1
[admin@MikroTik] > routing ospf network add network=172.16.0.192/28 area=area1

secara basic dan default setting ospf di quangga dan mikrotik sudah selesai, tingal kita lihat statusnya
di Mikrotik dan quangga
Mikrotik ;
[admin@MikroTik] > routing ospf neighbor print
router-id=172.16.0.200 address=172.16.0.204 priority=1 state=”2-Way” state-changes=0 ls-retransmits=0 ls-requests=0 db-summaries=0 dr-id=172.16.0.204 backup-dr-id=0.0.0.0

ups, sepertinya belum full. Check debug ospf pada log ;

[admin@MikroTik] routing> /log print
13:08:01 ospf,debug Hello received from 172.16.0.200 via [eth1:172.16.0.204]
13:08:01 ospf,debug Hello from 172.16.0.200: invalid HelloInterval 3, expected 10
13:08:04 ospf,debug Hello received from 172.16.0.200 via [eth1:172.16.0.204]
13:08:04 ospf,debug Hello from 172.16.0.200: invalid HelloInterval 3, expected 10
13:08:05 ospf,debug Hello sent to 224.0.0.5 via[eth1:172.16.0.204]
13:08:07 ospf,debug Hello received from 172.16.0.200 via [eth1:172.16.0.204]
13:08:07 ospf,debug Hello from 172.16.0.200: invalid HelloInterval 3, expected 10
13:08:10 ospf,debug Hello received from 172.16.0.200 via [eth1:172.16.0.204]
13:08:10 ospf,debug Hello from 172.16.0.200: invalid HelloInterval 3, expected 10
13:08:13 ospf,debug Hello received from 172.16.0.200 via [eth1:172.16.0.204]
13:08:13 ospf,debug Hello from 172.16.0.200: invalid HelloInterval 3, expected 10

dari hasil log ada ketidak cocokan hellointerval antara quangga dan Mikrotik.
Check default hellointerval di quangga dan sesuaikan sesuai informasi log yaitu 10

ospfd# conf t
ospfd(config)# int eth0
ospfd(config-if)# ip ospf hello-interval 10
ospfd(config-if)# end

before quangga;
ospfd# sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL
before mikrotik;
router-id=172.16.0.204 address=172.16.0.204 priority=1 state=”2-Way” state-changes=0 ls-retransmits=0 ls-requests=0 db-summaries=0 dr-id=172.16.0.204 backup-dr-id=0.0.0.0

After quangga;
ospfd# sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface RXmtL RqstL DBsmL
172.16.0.204 1 Full/DR 00:00:39 172.16.0.204 eth0:172.16.0.200 0 0 0
After Mikrotik;
[admin@MikroTik] > routing ospf neighbor print
router-id=172.16.0.200 address=172.16.0.200 priority=0 state=”Full” state-changes=5 ls-retransmits=0 ls-requests=0 db-summaries=0 dr-id=172.16.0.204 backup-dr-id=0.0.0.0
router-id=172.16.0.204 address=172.16.0.204 priority=1 state=”2-Way” state-changes=0 ls-retransmits=0 ls-requests=0 db-summaries=0 dr-id=172.16.0.204 backup-dr-id=0.0.0.0

check route di quangga

Router# sh ip route
Codes: K – kernel route, C – connected, S – static, R – RIP, O – OSPF,
I – ISIS, B – BGP, > – selected route, * – FIB route

O>* 20.21.22.0/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 20.21.22.4/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 20.21.22.8/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 20.21.22.12/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 20.21.22.16/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 20.21.22.20/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 30.31.32.0/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 30.31.32.4/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 30.31.32.8/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 30.31.32.12/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 30.31.32.16/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.0/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.4/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.8/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.12/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.16/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.20/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.24/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.28/30 [110/20] via 172.16.0.204, eth0, 00:05:12
O>* 40.41.42.32/30 [110/20] via 172.16.0.204, eth0, 00:05:12
C>* 127.0.0.0/8 is directly connected, lo
K>* 169.254.0.0/16 is directly connected, eth0
O 172.16.0.192/28 [110/10] is directly connected, eth0, 01:57:17
C>* 172.16.0.192/28 is directly connected, eth0
O>* 192.168.99.0/24 [110/20] via 172.16.0.204, eth0, 00:05:12

Kalender MotoGP 2009

April 12th – Qatar, Losail (Evening Race)
April 26th – Japan, Motegi
May 3rd – Spain, Jerez
May 17th – France, Le Mans
May 31st – Italy, Mugello
June 14th – Catalunya, Catalunya
June 27th – Netherlands, Assen (Saturday Race)
July 5th – United States, Laguna Seca (MotoGP Class only)
July 19th – Germany, Sachsenring
July 26th – Great Britain, Donington Park
August 16th – Czech Republic, Brno
August 30th – Indianapolis, Indianapolis
September 13th – San Marino, Misano
September 20th – Hungary, Balaton
October 4th – Portugal, Estoril
October 18th – Australia, Phillip Island
October 25th – Malaysia, Sepang
November 8th – Valencia, Ricardo Tormo Valencia

Di versi squid 2.5.STABLE14 untuk enable transparent proxy biasa kita tambahkan 4 baris ;

httpd_accel_host virtual
httpd_accel_port 80
httpd_accel_with_proxy on
httpd_accel_uses_host_header on

reload config coba redirect/dnat port jalan dech.

Dan lama nunggu yg stable akhirnya keluar 2.6.Stable6 , ketika di jajal copy paste squid.conf yg lama
keluar error

2009/02/13 15:24:01| parseConfigFile: squid.conf:3096 unrecognized: ‘httpd_accel_host’
2009/02/13 15:24:01| parseConfigFile: squid.conf:3097 unrecognized: ‘httpd_accel_port’
2009/02/13 15:24:01| parseConfigFile: squid.conf:3098 unrecognized: ‘httpd_accel_with_proxy’
2009/02/13 15:24:01| parseConfigFile: squid.conf:3099 unrecognized: ‘httpd_accel_uses_host_header’

browsing2 dikit ke google ternyata lain, padahal di squid.conf keterangannya dah jelas tuch

# TAG: http_port
# Usage: port [options]
# hostname:port [options]
# 1.2.3.4:port [options]

# Options:
#
# transparent Support for transparent interception of
# outgoing requests without browser settings.

Yah gitu dech kalo males baca , jadi config yg baru cukup simple ;

http_port 3128 transparent

dgn begitu sudah bisa jalan, ada option lain katanya squid ;

# Usage: [ip:]port cert=certificate.pem [key=key.pem] [options...]
# The socket address where Squid will listen for HTTPS client
# requests.

http_port 192.168.10.1:3128 transparent

just fur newbies

Namannya juga Kota santri , jarang2 ada Mall yg mau nyediain lahan yg segitu besar untuk masjid.
Biasanya dikasih Musola itupun adanya di basement kalo engga, di pojokan .

Tapi lain sama Asia Mall di Tasik ini, Mesjidnya cukup untuk 500 orang kurang lebih (Perkiraan )
adanya di area tempat parkir, Nama Mesjidnya “AL ISHLAH” . Disana kita tidak perlu ngantri untuk berwudhu
karena tempat wudhunya pun banyak.
Mudah2an ini jadi percontohan untuk pengelola2 Mall di kota2 besar.

Services syslogd secara default hanya logging pada localhost. Untuk bisa menampung log dari luar dan dijadikan sebagai server ada ada 2 cara;

1. Jalankan syslogd dgn menambahkan option -r

“syslogd -r”

2. Rubah file menjadi ” SYSLOGD_OPTIONS=”-r” di /etc/sysconfig/syslog sesuai kebutuhan

# Options to syslogd
# -m 0 disables ‘MARK’ messages.
# -r enables logging from remote machines
# -x disables DNS lookups on messages recieved with -r

Restart dech servicesnya

[root@noc /]# netstat -anu | grep 514
udp        0      0 0.0.0.0:514                 0.0.0.0:*  

udp 514 dah listen berarti dah bisa terima logging dari luar , atur lagi file /etc/syslogd.conf untuk filtering nya.

Jelang MotoGP Indianapolis 

Reky Herling Kalumata – detiksport

New York – Dani Pedrosa menuju Indianapolis dengan keyakinan tinggi. Pembalap Spanyol ini yakin akan mendapatkan kemajuan besar setelah dia berganti memakai ban Bridgestone.

Pedrosa baru saja berganti pabrikan ban dari Michelin ke Bridgestone setelah tampil MotoGP San Marino. Pembalap berusia 22 tahun ini pun langsung dapat menyesuaikan diri dengan baik setelah mencatat waktu tercepat saat ujicoba di Misano pekan lalu.

Tentu saja Pedrosa semakin percaya diri menghadapi MotoGP Indianapolis akhir pekan ini. Meski demikian, pembalap Repsol Honda mengakui bahwa masih memerlukan waktu untuk dapat menyesuaikan dengan baik ban pabrikan asal Jepang ini.

“Kami lambat start dan akhirnya kami dapat mendapat kemajuan dari lainnya. Tes pertama kami sangat bagus dan melakukan beberapa jam mencobanya. Namun Anda tahu saya senang dan akhirnya bisa bisa mendapatkan tes yang bagus,” kata Pedrosa seperti dilansir Autosport.

“Tentu saja ketika kami segera berganti ban saya merasa kami harus beradaptasi dengan ban ini. Kaki harus mendapatkan kombinasi terbaik. Dengan trek baru ini adalah hal lain, dan saya hanya mencoba menikmatinya pekan ini di sini,” tukasnya.
( key / roz )